STEP 1
Using the Allen wrench supplied with the
bed, completely unscrew the 4 Allen bolts (x)
(previously mounted in factory) located 2 by
2 on the lateral sides of the front panel.
Then, remove the middle panel resulted
(see
). Store the middle panel
resulted in a proper place, taking care not to
scratch it. Keep the Allen bolts at your hand
because you will use them at the next step.
If you haven’t done it before, adjust your
mattress support to it’s lowest level, as
described in
of your crib
assembling instructions.
FIGURE 1
STEP B
x
x
x
x
FIGURE 1