STEP A
STEP B
STEP C
STEP D
(Two adults are required to complete this step)
STEP 7
STEP 2
“ASSEMBLY INSTRUCTIONS FOR YOUR 9510 STATIONARY CRIB”
(Two adults are required to complete this step)
(A1)
(9)
(A2)
(DB)
(DB)
(EP)
(LP)
STEP 1
“ASSEMBLY INSTRUCTIONS FOR YOUR 9510 STATIONARY
CRIB”.
(A2)
Do not over-tight the cams! This is not a fixture involved in your child safety.
(Two adults are required to complete this step)
(EP)
STEP A & B
(A2 & 10)
Do not over-tight the cams! This is not a fixture involved in your child safety.
(Two adults are required to complete this step)
STEP 4
STEP 7
“ASSEMBLY INSTRUCTIONS FOR YOUR 9510 STATIONARY CRIB”
STEP 5
Disassemble the crib by following in reverse order
to
from
.
Using a Phillips screwdriver (not supplied) or just the hand insert eight metallic dowels
into the middle threaded inserts from the end panels, assuming that the dowels for the
lower panels
are still in position. Please see the assembly tip for dowel correct positioning.
Insert eight cam fittings
into the bigger holes located in the daybed rails
taking care that the little arrow of the cam is pointing to the nearest end of the rail.
Attach the daybed rails
to the end & lower panels
&
as they resulted after completing
from
Then using the supplied Allen wrench and moderate force, slightly rotate the cams
clockwise (see the cam’s rounded arrow) by about 90 deg to 120 deg until become tight.
arefully s
Attach the other end panel
to the part of your crib as it resulted after completing
then, using the supplied Allen wrench and moderate force, slightly rotate the cams
clockwise (see the cam’s rounded arrow) by about 90 deg to 120 deg until become tight.
Follow
to
from
.
When you reach
adjust the mattress support to it’s lowest position.
C
tore the resulted upper panels in a proper place, away from direct sunlight and moisture, taking care not to scratch the wood finish.
Remember: the resulted hardware is not a toy!
You must keep this hardware in a proper place, away from your children.
After completing
, your crib should look like the one depicted on the first page of this instruction booklet.
STEP D
Summary of Contents for DB 9510
Page 5: ......
