Insert the mattress support
into the crib and fix it
on the back panel
through the wooden blocks
using 2 rounded head bolts
, 2 washers
and
the Phillips screwdriver (not supplied).
Fix the mattress support on the front panel
through the wooden blocks as described above.
STEP 4
(M)
(B)
(1)
(8)
(F)
Tighten completely
the four rounded head
bolts listed above.
The lock
washer must be attached to the bolt before inserting
the bolt through the metallic bracket of the mattress
support.
FIGURE 4
FLOOR
B
F
L
R
1
1
M
WARNING!
TIGHTEN COMPLETELY!
WARNING:
VERY IMPORTANT
TO KEEP YOUR BABY
SECURE AND SAFE, AND TO AVOID
POTENTIAL INJURY OR DEATH, IT'S
TO TIGHTEN
COMPLETELY ALL THE 4 BOLTS LISTED
IN
.
STEP 4
TIGHTEN THE SAME BOLTS ON
THE FRONT PANEL OF YOUR CRIB!
1
8
8
8
