M A N U A L
Ver.2 100510
• QuickMove is not intended for long transfers.
•QuickMove can only be used on flat floor.
To transfer with QuickMove, the patient must be able to:
• support weight while standing
• stand up and maintain balance (with support)
• grasp handles
• understand instructions
Special requirements and conditions
Testing standing function
QuickMove is ideal for testing a patient’s standing function in cases where there is
uncertainty as to whether the patient is able to rise from a seated to a standing posi-
tion.
Training standing function
QuickMove can be used to train the patient’s standing, sitting and sit-to-stand func-
tion. To measure improvement, use a stopwatch or clock with a second hand to time
the patient.
Farther back in the chair
If the patient slides forward in the wheelchair, the QuickMove can be used to help the patient to slide farther back in the
chair.
Remove/raise the wheelchair foot plates, and then run the QuickMove in towards the wheelchair. The patient places his/her
feet on the foot plate, grasps the raising ladder, leans forward, and then lifts from the seat. The caregiver provides counter
pressure. Slide the patient farther back in the chair when he/she has lifted slightly from the seat.
QuickMove
3
