14
Portable
power
solutions
GRID
45Watt Solar Mat Kit
Operation – Dip Switch
Please check your battery manufacture’s specifications to select the correct
battery type to be charged. There are four battery types to select from,
including; GEL, AGM, WET (conventional lead-acid) and Calcium.
The ‘DIP’ switch is located on the rear of the solar controller. Use the ‘DIP’
switch to select the corresponding settings to match the battery type that
you are charging from the diagram below. The default setting from the
factory is AGM type battery.
IMPORTANT:
Once the ‘DIP’ switch setting have been selected and the charging process
has begun, do not change the ‘DIP’ switch setting at this point as damaging
to the battery may occur. Disconnect the battery before changing the ‘DIP’
switch setting.
Battery
DIP Switch
Battery Type
Selection
Battery Type
AGM
GEL
WET
Calcium
(14.4V)
(14.1V)
(14.7V)
(14.9V)
OFF
ON
OFF
ON
OFF
OFF
ON
ON
ON
ON
1
2
OFF OFF
Solar Cells
