![background image](http://html.mh-extra.com/html/roma-medical/shoprider/shoprider_service-manual_1483968007.webp)
5. Seat Removal
NOTE: Always disconnect the joystick control before attempting
to remove the seat. Failure to do so could damage the loom or
controller.
Before undertaking maintenance or repair work on the powerchair,
you will have to remove the chassis cover, which will involve the
removal of the seat.
Models 888W, WS & WA have handknobs underneath the seat. Undo
the handknobs and simply lift the seat away from the chassis.
Models 888WNLS/M/L have release levers under the seat, which
enable the seat to be lifted forward to gain access to the running
gear, batteries and looms. Unplug the controller and remove the
armpad by undoing the arm height adjustment handknob, place this
carefully to avoid damage. Release the two rear yellow levers and lift
the seat forwards and over. Place a protective sheet on the floor to
protect the seat. The Sena and Malaga chassis covers can be
removed. The rear seat struts must be removed on the Lugano by
removing the locking pins before the chassis cover can be removed.
Please see images on following page.
Caution should be taken when lifting the larger type captain seats
(20kgs).
7
Summary of Contents for Shoprider
Page 1: ...Powerchair Service Manual ...
Page 8: ...8 ...