background image

SERVICE MANUAL 

 

17

  Real-time packet 26 engine in Hardware for processing accented, G2 and G3 characters 

  Signal quality detector for video and WST/VPS data types 

  Comprehensive teletext language coverage 

  Full Field and Vertical Blanking Interval (VBI) data capture of WST data 

 

Display 

  Teletext and Enhanced OSD modes 

  Features of level 1.5 WST and US Close Caption 

  Serial and Parallel Display Attributes 

  Single/Double/Quadruple Width and Height for characters 

  Scrolling of display region 

  Variable flash rate controlled by software 

  Enhanced display features including overlining, underlining and italics 

  Soft colours using CLUT with 4096 colour palette 

  Globally selectable scan lines per row (9/10/13/16) and character matrix [12x10, 12x13, 12x16 

(VxH)] 

  Fringing (Shadow) selectable from N-S-E-W direction 

  Fringe colour selectable 

  Meshing of defined area 

  Contrast reduction of defined area 

 Cursor 

  Special Graphics Characters with two planes, allowing four colours per character 

  32 software redefinable On-Screen display characters 

  4 WST Character sets (G0/G2) in single device (e.g. Latin, Cyrillic, Greek, Arabic) 

  G1 Mosaic graphics, Limited G3 Line drawing characters 

  WST Character sets and Closed Caption Character set in single device 

 

Functional Difference Between The Various Ic Versions 

Ic Version (TDA) 9350 9351 9352 9353 9360 9361 9362 9363 9364 9365 9366 9367 9380 9381 9382 

9383 9384 9385 9386 9387 9388 9389 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for 21C19/PF21C19















































Reviews: