background image

INTRODUCTION

Congratulations and thank you for your purchase of the RP221 Bottom Feeder -
Crossover, sub-sonic synthisizer, and Sonic Exciter. The outputs are not only
separate high and low frequencies, but enhanced for crystal clear highs and lows
worthy of Richter scale measurements. You’ve now got complete control over the
tone of your sound.
Please review this manual carefully as it contains the information necessary for
the proper setup and operation of your new RP221 Bottom Feeder.

THE ROLLS SONIC EXCITER - SCE PROCESSING
The human ear can detect a frequency range of roughly 20Hz to 20kHz. However,
the frequency response that a normal speaker can effectively reproduce is much,
much less. Additionally, speakers add distortion and phase changes that make the
sound quite different from that of the original material.

A sonic exciter restores clarity and presence to the processed signal by correcting
phase changes and harmonic structure differences. In other words, it puts the
components of the sound back where they belong.

All of this magic is done by the use of all-pass filtering, frequency compensated
gain adjustment, and compensated frequency domain delay. What this means to
you is the elements of your sound are fanned out like a deck of cards, making
each sound more audible and distinct, reducing the need for high volume and
radical equalizer adjustment.

TABLE OF CONTENTS

Introduction

1

Table of Contents

1

Inspection

2

Specifications

2

Descriptions

Front Panel

3

Rear Panel

3

Connection

4

Operation

4

Schematic

5

Warranty

6

LIMITED WARRANTY

This product is warranted to the original consumer purchaser to be free from

defects in materials and workmanship under normal installation, use and service for a

period of one (1) year from the date of purchase as shown on the purchaser’s receipt.

The obligation of Rolls Corporation under this warranty shall be limited to repair

or replacement (at our option), during the warranty period of any part which proves

defective in material or workmanship under normal installation, use and service, provided

the product is returned to Rolls Corporation, TRANSPORTATION CHARGES PRE-

PAID. Products returned to us or to an authorized Service Center must be accompanied by

a copy of the purchase receipt. In the absence of such purchase receipt, the warranty

period shall be one (1) year from the date of manufacture.

This warranty shall be invalid if the product is damaged as a result of deface-

ment, misuse, abuse, neglect, accident, destruction or alteration of the serial number,

improper electrical voltages or currents, repair, alteration or maintenance by any person or

party other than our own service facility or an authorized Service Center, or any use

violative of instructions furnished by us.

This one-year warranty is in lieu of all expressed warranties, obligations or

liabilities. ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES,

INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MER-

CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE

LIMITED IN DURATION TO THE ONE YEAR DURATION OF THIS WRITTEN

LIMITED WARRANTY. Some states do not allow limitations on how long an implied

warranty lasts, so the above limitation may not apply to you.

IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL, INCIDENTAL

OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER

WARRANTY, EXPRESSED OR IMPLIED, WHATSOEVER. Some states do not allow

the exclusion or limitation of special, incidental or consequential damages so the above

limitation or exclusion may not apply to you. This warranty gives you specific legal

rights, and you may also have other rights which vary from state to state.

1

6

Summary of Contents for RP221

Page 1: ...SALT LAKE CITY UTAH 5 04 INPUT LEVEL clip ACTIVE BOTTOM DEFINITION XOVER FREQ SUB LEVEL SUB OCTAVE SYNTH LEVEL pwr 12 VDC SUB OUT HIGH OUTPUT LOOP THRU INPUT RP221 LEFT RIGHT MODEL RP221 MADE IN USA SERIAL NUMBER 221 0 0 0 20 25 30 40 55 80 90 100 120 130 140 27 10 10 dB Hz 0 0 ...

Page 2: ...for a period of one 1 year from the date of purchase as shown on the purchaser s receipt The obligation of Rolls Corporation under this warranty shall be limited to repair or replacement at our option during the warranty period of any part which proves defective in material or workmanship under normal installation use and service provided the product is returned to Rolls Corporation TRANSPORTATION...

Page 3: ...cking materials for safely transporting the unit in the future 2 Please complete the Warranty Registration Card and return it to the factory SPECIFICATIONS Frequency Response 20Hz to 40kHz Input Impedance 10KΩ unbalanced THD Noise 0 07 typical Noise Floor 78 dB Indicators Power LED Clip LED Input Output jacks 4 Stereo RCA jacks Dimensions Weight 4 lbs Power 12 VDC Rolls Model PS27 SCHEMATIC 2 5 ...

Page 4: ...1 to the signal source you want processed such as a DJ mixer or Karaoke unit output for example Connect the High Outputs to an amplifier and speaker combination designed to receive signals above at least 140 Hz Connect the Sub Outputs to an amplifier speaker combination designed to receive signals below 140 Hz Remember to consult the speaker manufacturers owners manuals for proper crossover settin...

Reviews: