SPECIFICATIONS:
IN Connectors: XLR
OUT Connectors: XLR
Size: 5"w x 5"d x 1.5"h
Passive design, NO power, NO electronics and NO distortion.
Thick powder coated steel chassis..
100% Handcrafted in Salt Lake City, UT.
Rolls Corporation
Salt Lake City, UT
7/19
Made in USA ww.rolls.com
Made in USA ww.rolls.com
MS211
Push to talk or
Push to mute
Mic Stand
The MS211 PTT or PTM mic stand is a passive design.
That means NO power required, NO electronics used and
NO distortion will ever be added.
The chassis is made from .090" steel, meaning it is 3 times
thicker than most chassis. Female XLR jack for connection
to your mic and Male XLR for output.
All this and it is 100% Handcrafted in Salt Lake City, UT.
What's in the box?
1 - Made in USA MS211
1 - This owners manual
0 - Power supply (its an all pas-
sive unit)
Thank you for purchasing the MS211. We sincerely appreci-
ate the opportunity to build a product for you and participate
in your love of quality music and sound. We love what we do
and we’re happy to help. Rolls products are hand built in Salt
Lake City, Utah by people who care about high quality audio.
MS211 Mic Stand
- XLR input and output jacks
- Momentary Switch
- Bottom panel screw holes for convenient mounting
- Can function as push to talk or Push to mute
This device momentarily mutes (or talks) a microphone
signal. This function is very handy in the event of a
sneeze, cough, or other possible distracting noise. Or
when you need to control when a mic is active for an-
nouncing or paging.
