Thank you for your purchase of the MS19 Mic Combiner. This unit was
designed to combine two balanced XLR signals, one direct - one trans-
former isolated, to one single XLR output signal. A ground lift switch has
been provided to eliminate some cases of hum caused by ground loops.
INSPECTION
1. Unpack and Inspect the MS19 package
Your MS19 was carefully packed at the factory in a protective carton.
Nonetheless, be sure to examine the unit and the carton for any signs of
damage that may have occurred during shipping. If obvious physical
damage is noticed, contact the carrier immediately to make a damage
claim. We suggest saving the shipping carton and packing materials for
safely transporting the unit in the future.
2. Please complete the Warranty Registration Card and return it to the
factory.
DESCRIPTION
INPUT 1: Female XLR jack for connection to a microphone or other signal
to be combined.
INPUT 2: Female XLR jack for connection to a microphone or other signal
to be combined.
OUTPUT: Male XLR jack for connection to a mixing console or other
signal processing device.
GROUND LIFT: Switch when in "GROUND" position, indicates that pins 1
of the INPUTS and OUTPUT jacks are connected. In the "LIFT" position,
the grounds have been separated.
OPERATION
Shown below is an example of how to connect your MS19.
SPECIFICATIONS
Input Impedance:
600 Ohms
Output Impedance:
600 Ohms
Dimensions:
3 x 2.25 x 1.2 inches
Weight:
8 Ounces
MIC COMBINER
LIFT
GROUND
MS19
LIFT
GROUND
MS19
TO MIXER
MIC COMBINER
MADE IN USA
