Thank you for your purchase of the GS76 Game Show. This device
determines which "contestant" has identified a proper response first.
INSPECTION
1. Unpack and Inspect the GS76 package
Your GS76 was carefully packed at the factory in a protective carton.
Nonetheless, be sure to examine the unit and the carton for any signs of
damage that may have occurred during shipping. If obvious physical
damage is noticed, contact the carrier immediately to make a damage
claim. We suggest saving the shipping carton and packing materials for
safely transporting the unit in the future.
2. Please complete the Warranty Registration Card and return it to the
factory.
DESCRIPTION
CONTESTANT
1
2
3
4
5
6
7
8
READY
GAME
SHOW
GS76
JOIN
9 - 16 VDC
MADE IN THE U.S.A.
The GS76 Controller (shown above) has eight modular telephone jack
inputs on the back, eight green "ring-in" LEDs and a red "Status" LED on
the top, and a "Join" modular telephone jack and a DC Input Jack on the
front of the unit.
Each GS76 Remote consists of a "Ring-in" switch, a green "Ring-in"
LED, and a modular telephone jack input. Each Remote comes with a 15
foot length of telephone cord.
OPERATION
Upon power-up, the GS76 controller beeps and the eight indicator LEDs
light up. After approximately three seconds, the indicator LEDs go out
and the Ready LED lights.
During operation, when a remote button is pressed, all other remotes are
locked out, and the corresponding indicator LED on the controller will light.
Approximately three seconds after a contestant has rung-in, the indicator LED will
go out, and the Ready LED will light again indicating the system is ready
for another use.
Note: Before beginning contests, press the "Ring-In" switch on each
Remote several times to ensure proper operation.
