Rolls-Royce Helicon X3, User Manual

Page: 111 / 140

Trouble Shooting
8
Page 15 of 16 Doc. No.: 13S000411
Revision: A Copyright © 2010 Rolls-Royce plc
2.10 Lever Display Error Information
The following messages will be issued for the lever on the lever display:
2.11 LED Indicators
Some status and error informations are also available directly on the lever control card,
if available.
Two leds are located beside the node adress switches.
• Status led (left, green)
• Error led (right, red)
Message Description
Err. 1 Initialisation Error
Err. 2 CAN Fieldbus Error
Err. 3 Sensor IO Error
Err. 6 The lever unit has lost the communication to the Application Controller.
Status Led Information Description
Short On, Long Off blink The lever controller is running but with no communication with the
Application Controller on the CAN Fieldbus.
Long On, Short Off blink The Lever Controller is running with normal communication with the
Application Controller on the CAN Fieldbus.
Error Led Information Description
Led off Normal operation, no errors
One Short blink Initialisation Error
Two Short blinks CAN Fieldbus Error
Three Short blinks Sensor Error