9
Connect the Battery
Fig. 1
Fig. 2
BEFORE THE INITIAL CHARGE, YOU MUST CONNECT THE
BATTERY UNDERNEATH THE SEAT.
The product ships with the battery disconnected, so please follow
the steps below to connect the battery to the Nighthawk NexGen
prior to charging for the first time. The Nighthawk NexGen will not
charge or work if you skip this step.
1. Remove the Seat:
Rotate the seat lock (Fig.1) to the unlock position and lift up the
seat using the indentation at the front of the seat.
2. Connect the Battery:
Underneath the seat, locate the battery and the matching yellow
connectors. Plug the battery into the yellow connector located in
the compartment beneath the seat (Fig. 2).
3. Install the Seat:
After connecting the battery, slide the seat into place on the vehicle
body. Use a coin or flathead screwdriver to turn the lock to the
locked position.