12
Assemble the Right Rear Wheel
1. Locate 1 thin washer (14) and 1 snap pin (12).
2. Slide the rear wheel (8) onto the axle with the gear teeth facing inward.
Ensure that the gear teeth engage with the gear box already installed on
the axle.
3. Slide the thin washer (14) onto the axle
4. Insert the straight side of the snap pin (12) through the hole at the end
of the axle to keep the wheel in place
5. Position the chrome rim (9) over the holes on the wheel and snap into
place
Helpful Tip:
1. If you encounter trouble fitting both
wheels onto the rear axle, then your rear
wheel axle may need to be realigned.
2. Remove both wheels from the rear
wheel axle. Using two hands, push
down on the rear wheel axle and slide it
gently toward the side of the vehicle that
needs more room.
