Rollplay 12V Jaguar CX-75, Owner'S Manual And Assembly Instructions

Page: 13 / 25

13
B
A
11
12
3
Attach the Steering Wheel
1. Open the right door.
2. Locate the steering wheel screw (11) and nut (12) from the blister pack.
3. Plug the steering wheel connector (A) into the dashboard connector (B).
4. Carefully slide the wires into the steering column.
5. Slide the steering wheel onto the steering rod that comes up through the
dashboard, and align the holes on the steering wheel with the holes on the
steering rod.
6. Insert the screw into the hole on the steering wheel, and fasten the nut on the
other side to secure.
Helpful Tip:
1. If you encounter trouble aligning the
holes on the axle with the holes on
the steering wheel, then the steering
rod may not be pushed through the
dashboard completely.
2. Reach underneath the car and locate
the steering rod. Push up on the steering
rod so that it is completely through the
dashboard.