13
Troubleshooting
The roller will not move up and down:
Reset the emergency stop function
Check the air flow
Check the power connection
Reset the fuse
Check that the main switch is in the correct position
If this does not help, contact a technician from your local
dealer.
The roller runs unevenly over the bed:
Check the parallelism of the roller across the table with the
roller in the upper position. This is done by measuring the
distance between the roller shaft and the steel edge of the
machine. If the distance is not equal on both sides, contact a
technician.
Dark areas in the glass bed:
Inspect the underside of the table to check if one or more of
the LED-strips are not working. Contact Rollover at
or a technician from your local dealer
to replace defect
LED’s
.
Repairs in general:
Contact a technician via the dealer where you purchased your Rollover.
Notice!
The machine must only be used for its intended purpose as specified in this manual. All other use may
result in damage or injury, and is at the user’s own risk
and liability.
Rollover Flatbed Applicators are made by:
Ramstadløkka 3 Mail: [email protected]
N
–
1850 Mysen
www.rollover.no
Norway Phone: +47 69898888
Summary of Contents for FLEXI
Page 1: ...1 User Manual ...
