USAGE
Read the following information before attempting to ride your Roller-Pro Hopper E-scooter.
How to Ride:
Before starting to ride, make sure you are well equipped and protected. The Roller-Pro Hopper
E-Scooter is placed on a flat level surface and is fully charged. Follow the below steps. For your
safety, please read this entire section before attempting to ride.
Step 1.
Carefully step on with one foot and stand upright but relaxed. Grab both handles.
Step 2.
Keep one foot on the ground and press the throttle very slowly to begin accelerating. Use
the handles to steer.
Step 3.
Start your Roller-Pro Hopper E-Scooter by pressing the power button, and continue
accelerating by pushing the throttle.
Step 4.
To stop, release the throttle and use the handbrake, footbrake, or both to gradually come to
a stop. Step out of the scooter by putting one leg at a time.
Step 5.
To turn the scooter off, remain at a complete stop for a few seconds and press and hold the
power button for approximately 3 to 5 seconds.
7
Do not, under any circumstances, use the E-scooter while it is connected to the charger.
Do not charge longer than necessary. Standard charging time is approx. 3 hours.
Charging longer than this may affect the battery life and/or performance.
To maximize the battery life, charge it once every other month or once a week after
riding. This process is very important for the battery to keep running.
Charge preferably in places away from flammable products.
Monitor and control the charging process (Do not exceed the recommended Charging
time)
Do not charge your E-scooter at night while you are sleeping.
If your E-scooter has been exposed to High or low temperatures, wait until it has been
cooled down before charging.
The Roller-Pro Hopper E-Scooter supports up to 120 kg. Do not carry passengers.
Only operate the Roller-Pro Hopper E-Scooter where permitted. Local laws may restrict where
you may ride.
The Roller-Pro Hopper E-Scooter contains a motor and may be classified as a motor vehicle
under local laws in your area. It is your responsibility to abide by any local laws restricting how
or where you may ride.
Cruise Control:
The cruise control function operates automatically, once the Hopper reaches a certain speed.
While riding the Hopper E-scooter at around 12-14 km/h, at one point, a beep sound will be
heard.
This beep sound indicates that the Auto cruise control is activated and therefore you can release
the throttle button as the E-scooter will continue riding at a constant speed.
To disactivate the auto cruise control, simply press the brake or the throttle.
Practicing Guidelines:
Practice until you are comfortable with using all of the scooter’s functions. Check the following
tips below.
Avoid wearing anything that can drape over or get caught into/under the wheels. Wear
closed-toe, flat shoes to maintain flexibility and stability.
Practice until you can easily get on, move forward, turn, stop, and dismount with ease.
The scooter is designed to handle inclines up to 15°. The inclination will depend on the battery
status, weight, the terrain type on which you are riding. Riding over steep inclines is not
recommended.
■
■
■
