- Clean regularly the metallic parts after each use by using only use non-abrasive
products, warm water and wash liquid: avoid the abrasive towelling. Rinse your
device with a wet sponge and dry it with a soft cloth.
- Never clean the device under a water jet, the infiltrations would risk to damage it
in a irreparable way.
- Never immerse the cord or the plug in the water or quite other liquid to avoid any
electric shock.
-
Regularly change the water to avoid any scale deposit.
- Never use abrasive product or vinegar, it could damage the container in irreme-
diable way.
7. TECHNICAL SPECIFICATIONS
Wires colours correspondence
Phase Brown / Black / Grey
Neutral Blue
Earth Yellow-Green
8. NORMS AND LEGALS DISPOSALS
The device is conform to :
IEC/EN 60335-1
IEC/EN 60335-2-49
EN 55014-1 + 55014-2
EN 61000-3-2 + 61000-3-3
9. ELIMINATION OF THE ELECTRIC AND ELECTRONIC WASTE
The device respects the directives:
2002/ 96/CE ( DEEE) N°34270064800021
2002/ 95/CE ( ROHS)
2066/95 CE
2004/108 CE
6
Model
SBM 40 C
Dimensions
1495x855x1405 mm
Weight
100 Kg
Power
+20° à +90° C
Gas
3600 W
Voltage
220-240 V ~
Colours
Wenge/Light oak / Mahogany
Current
15.5 A
Temperature
2
B. Unscrew the protective screw
on the container (Picture D) and
fix the left upright with the screw.
(Picture E)
C. Fix the screw B (Picture F)
behind the left upright (Picture
E).
Mounting of mirror
The mirror must be taken by 2
persons and be put along the
slide on the left upright. One per-
son must support it in its posi-
tion. .(Picture G)
Right upright
A. Remove the protective film from the right upright.
Picture E
Picture D
Pho-
Picture G
Picture F
Picture H
9
