8
7. TECHNICAL SPECIFICATIONS
The machine is delivered with a cord fitted with 5 wires
Wires colours correspondence
Phase 1
Brown
Phase 2
Black
Phase 3
Grey
Neutral
Blue
Earth
Yellow
-
Green
The equipotential connection marked by this symbol must be linked with the equipo-
tential conductive connection of your installation by means of a minimum conduction of a 2.5
mm² section.
8. NORMS AND LEGALS DISPOSALS
The device is conform to
:
IEC/EN 60335
-
1
IEC/EN 60335
-
2
-
37
EN 55014
-
1 + 55014
-
2
EN 61000
-
3
-
2 + 61000
-
3
-
3
9. ELIMINATION OF THE ELECTRIC AND ELECTRONIC WASTE
The device respects the directives:
2002/96/CE (DEEE) N°34270064800021
2002/95CE (ROHS)
2006/95 CE
2004/108 CE
Model
RFE 16 C
Power
12 kW
Outside dimensions
400 x 660 x 980 mm
Volume
16 L
No element
3
Volatge
380
-
415 V 3 N ~
Ampere
17 A/ Phase
Weight
34 Kg
RFE 20 C
12 kW
400 x 660 x 980 mm
2 x 10 L
2
380
-
415 V 3 N ~
26 A/ Phase
38 Kg
Maximum charges
(Kg)
4
2 x 1.5
7
-
Fill the basket in and plunge it slowly into the oil.
-
When cooking is finished, lift the basket and set it on its stand.
Safety thermostat
In case of overheating or lack of oil, your deep fryer will automatically stop. Unplug it and
let it cool. Then check the oil level:
1) Oil level is too low: add some oil and reload the knob (n°2 on picture)
2) Oil is too old: change it and reload the knob (n°2 on picture)
3) Other cases: call your after sale service
Stopping the appliance
-
Set the thermostat control knob to zero
-
Set the commutator to zero
-
Unplug the appliance.
-
Let the device cool.
-
Clean the appliance (See 6.Cleaning)
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after
-
sales service and confide any
technical operation to qualified person.
When you contact the after
-
sales service of your distributor or your store, give him the complete
reference of your device (commercial name, type and serial number). This information appears
on the visible descriptive plate behind the device.
6. CLEANING AND MAINTENANCE
-
Let cool completely the device and the oil before any technical intervention or cleaning.
-
Unplug the machine and remove the control unit before cleaning.
-
For cleaning, only use non
-
abrasive products, clean regularly the external walls of your device
with warm water and wash liquid: avoid the abrasive towelling. Rinse your device with a wet
sponge.
-
Caution : do not damage the heating element wires during cleaning
-
Never clean the device under a water jet
-
Never immerse the control unit in the water.
Summary of Contents for RFE 16 C
Page 2: ...13...
