YOU NOTICE THAT ...
POSSIBLE CAUSES
WHAT YOU CAN DO
When putting into service, a bright
display appears
Regular functioning
NOTHING: everything is normal
When putting into service, your
installation short-circuits
The connection of you device is
defective
Verify your connection or the
conformity of the connection
The ventilation continues a few
minutes after stopping the device
Cooling of the device
It’s normal
The device doesn’t work. The
display on the casing stays off
The device is not supplied. The
supply or the connection is
defective
Inspect fuses and the circuit
breaker of your electric installation
«
F-
» appears on the display
There is a touch activated
permanently on the control
keyboard
If the default doesn’t disappear,
call the after-sales service
«
F7
» appears on the display
Electric circuits are over heating
Inspect the ventilation of the
device and check if it is operational
The device doesn’t work, another
code appears on the display
Electric circuits doesn’t work well
Call the after-sales service
After switching on the device and
starting the cooking zone, the
selected indicator continues to
flash
The pan you are using is not
compatible with the induction
techhnology or is of a diameter
smaller than 16 cm
See «
Cookware Recommended
section
»
Pan makes noise while cooking
It’s a vibration generated byy the
circulation of the current in the pan
This phenomenon is normal with
some type of pans. There is no
danger
Small problems and their remedies
If you think that your hob is not functioning correctly
...... this does not necessarily mean that a fault has
occurred.
Please verify the following in all cases :
