14
• AudioVol (Audio volume):
Record your videos with or without sound.
1 = audio on (default), 0 = audio disabled
• LIGHTFREQ (Light frequency):
0 = 60 Hz, 1 = 50 Hz (default)
• RTCDisplay (Real time clock display):
Here you can choose whether the date and time you have set are displayed as
a time and date stamp on the video (note that you cannot delete it from the
video later!)
0 = disabled (default), 1 = enabled
• VideoSwitch (Resolution)
You can record videos in two different resolutions:
0 = 1080P (Full HD, default), 1 = 720P
• BuzzerAlert:
Adjust the tone volume of your Sunglasses Cam.
0 = off, 1 = loud, 2 = medium 3 = quiet (default)
Save your settings and changes again in the “Setting.txt” file and make sure
that this file is stored on the removable disk. After turning on your Sunglasses
Cam, the new settings are applied automatically.
5.6. Resetting the Sunglasses Cam
If the Sunglasses Cam is not functioning
normally, hangs during operation or
cannot be switched off normally, you
should reset the Sunglasses Cam. This
is done by pressing the RESET button
on the inside of the right earpiece for
about 3 seconds with a pointed stylus.
The Sunglasses Cam should switch off.
It should then be possible to switch it on normally again.
Rollei
Sunglasses Cam 100
