18
ENGLISH
Attaching the smartphone
Please make sure that the gimbal is switched off (see page 7). Insert the smartphone
as follows. Place one side of the smartphone in the smartphone holder. Push the upper
part of the holder upwards to enlarge the holder and then push the smartphone into
the holder. Make sure that the smartphone is correctly inserted and cannot fall out.
Note:
If no LEDs are lit, the gimbal is switched off.
NOTE:
The smartphone‘s home button should face the motor of the tilt axis. Please also make
sure that the smartphone is firmly attached to prevent vibration or jerking of the gim-
bal. If any part of the gimbal appears in the shot, push the smartphone slightly away
from the tilt motor until the gimbal is no longer visible in the picture.
Make sure the gimbal is switched off before attaching the smartphone. We strongly
recommend removing the smartphone case.
Installation
completed
