Rollei Pro Transmitter, Instructions Manual

Page: 34 / 124

34
ENGLISH
Operation
9 . How to set the Canon RT Mode (ZGB)?
Press the mode and channel button together, to open the RT mode (ZGB) .
The display will show the following sign . The signs CH / ID will be
shown on the display . Then shortly press the CH button to switch the CH to
ID. Press the plus or minus button to change the value, so that the flash and
the trigger do have the same ID .
Note: Please note that some settings can only be changed directly in the
menu of the camera and not via the trigger . This goes especially for Canon*/
Nikon* cameras . Therefore please check the camera‘s manual . It might hap-
pen, that the flash settings of the trigger will be overwritten by the settings
in the camera‘s menu .
*Canon and Nikon are registered trademarks, Canon and Nikon products are trademarks or registered
trademarks of Canon and Nikon .