6
ENGLISH
Operation
Mode 4:
Use the Plus / Minus buttons [3 / 9] to choose between five preset
colour temperatures for CCT light.
The following modes are available for selection:
– Shade
– Cloudy
– Sun
– Fluorescent
– Incandescent
After selecting, press the Select button [7] to adjust the brightness
between 5 – 100% in 1% steps using the Plus / Minus buttons [3 / 9].
Mode 5:
Press the Plus / Minus buttons [3 / 9] to adjust the Kelvin degree
in 100 K steps. Select your desired temperature from 3,000 K to
6,000 K.
After selecting, press the Select button [7] to adjust the brightness
with the Plus / Minus buttons [3 / 9] between 5 - 100% in 1% steps.
The LUMIS Glow RGB can also be used when connected to the
power supply (Power supply via USB cable and a not included USB
power adapter, output max. DC 5 V 3 A).
Note:
– Please use power supplies with a maximum output of DC
5 V 3 A to charge the LUMIS Glow RGB. The LUMIS Glow RGB
supports charging via Quick Charger and Super Charger up to
the above voltage.
– Please use only the supplied USB cable for charging the device.
Otherwise, there is a risk of fire or electric shock.
Operation with the Remote Control
You can also operate the Rollei LUMIS Glow
RGB using the remote control included in
the box content.
You can switch between the five different
modes via the Mode button [1].
The possible scenes and values can be set
via the Plus / Minus buttons [2 / 3].
Via the button labeled „RGB“ [4] you can
select the regulation of the brightness
within the modes or select the color values
in mode 3.
Technical Data
Remote control
Material
Plastic
Connection method
Wireless transmission
Frequency band
433 MHz
Max. transmission
3 dBm
power
Range
8 meters
Operation
Li-Ion button cell of type CR2025
(3.7 V / 150 mAh / 0.5 Wh)
Dimensions | Weight
8.5 x 4 cm | 14 g
Technical Data
LUMIS Glow RGB
Number of LEDs
114 (38 cool white / 38 warm white /
38 RGB)
Power
10 W
Energy efficiency class G
(EU 2017/1369)
EU energy efficiency
A – G
class spectrum
(EU 2017/1369)
Colour temperature
3,000 K – 6,000 K, in 100 K steps
Colour shades
256
Colour rendering index >85
(CRI)
Television Lighting
>80
Consistency Index (TLCI)
Illumination angle
180°
Power control
0 – 100%, in 1% steps
Illuminance
1,100 lx (5,500 K at 0.5 m)
Lighting effects
7 (in mode 1)
Remote control
Remote control
Frequency range
432 MHz
Max. transmission
9 dBm
power
Input
DC 5 V 3 A
Battery life
Approx. 60 minutes at 100% power
at 4,500 K
Power supply
Input: DC 5 V 3 A
Rechargable Li-Ion battery
(3.7 V / 2.000 mAh / 0.8 Wh)
Connections
¼“ thread, USB-C connection,
hand strap attachment
Additional features
LC display
Dimensions | Weight
50 x 4 cm | 190 g
Box content
Rollei Lumis Glow RGB, USB-C cable,
remote control, transport bag, hand
strap and user manual
Design and technical data are subject to change without notice.
Safety Instructions
Electric current hazard!
Faulty electrical installations or excessive line voltage can cause
electric shock.
– Connect the product to an easily accessible socket for charging
so that you can quickly disconnect it from the mains in case of
problems.
– Only use the USB cable supplied.
– Do not use the product if it is visibly damaged or if the cable is
defective.
– If the product or accessories are damaged, they must be
replaced or repaired by the manufacturer, its customer service
department or a similarly qualified person in order to avoid
hazards.
– The housing must not be opened and repairs must only be
carried out by a specialist. Contact a specialist workshop for this
purpose. In the event of repairs by the user, improper connec-
tion or incorrect operation, any liability and all warranty claims
are excluded.
– Do not use the product with an external timer.
1
3
2
4