Take a Picture
To Start
Press the photo button . There will be a clicking sound.
Take Still Pictures
In photo mode the camera can capture image in burst rate at 3/1sec 5/1sec 10/1 sec
10/2sec.
To Start
Press the photo button . The red status indicator light will flash
and there will be clicking sound while photo shooting.
To Stop
Press the photo button again to stop shooting.
The camera automatically stops taking photos when the memory card is full or the
battery is out of power. Your photos will be saved before the camera powers off.
Time Lapse
In time lapse mode the camera will take sequentially 1 frame per second, 1 frame per
2 seconds, 1 frame per 5 seconds, 1 frame per 10 seconds, 1 frame per 30 seconds
or 1 frame per 60 seconds.
To Start
Press and hold , Menu > Video Setting > Time Lapse
Press the video button . The red status indicator light will flash
and there will be clicking sound while recording. Light flashes each
time a photo is taken.
To Stop
Press the video button again to stop recording.
When using the Time Lapse, an micro SD card with a Speed Class 10 Rating is
required. To capture a time lapse series, verify the camera is in time lapse mode.
Self Timer
To Start
Press and hold , Menu > Photo Menu > Self time
Select "OFF" / 3 / 5 / 10 / 30 / 60 second intervals
The camera can be configured to automatically recording or take pictures.
Default Settings
The camera powers up with the following default settings:
Video resolution 1080p @30fps
Photo resolution 14.0 Megapixels (MP)
Photo Burst SINGLE
WiFi ON
Display ON
Date & time stamp OFF
