35
Operation with the Remote Control
Power Button
Press for 1 second for switching the remote control on .
Press for 3 seconds for switching it off .
The remote control, enters power saving mode after 5 minutes of
inacitivty . Reactivate it by pressing .
Charge the remote control once every week for 1 hour to avoid a loss
of battery capacity .
Channel Switch Button
Press for 3 seconds for changing the channel between channels
0 and 6 . The channel of the LED panel stays the same and does not
change .
Setting the Color Temperature
/
Press to set the color temperature to cool white .
Press to set the color temperature to warm white .
The color temperature can be set between 2,500 K and 9,000 K . Press
or briefly to adjust the color temperature in 10 K steps . Press
and long to adjust the color temperature in 100 K steps .
Setting the Brightness
/
Press / for adjusting the brightness . The brightness can be
adjusted between 0 and 100 % in 1 % steps .
Standby Button for LED Panel
Press to switch off the LED panel .
