10)
Program Shades
– Keep reading here first!!
Connect power to your motor correctly. The Rollease Q2 (28mm)
DCRF motors require 12V DC power. Damage to the motor due to
improper power connection will void the warranty.
Please use the motor specific instructions provided with your motors. If
they were not included, please email us, call us or visit our website for the
specific motor instructions. The remote-control instructions can be used
for reference but are not as accurate as the motor instructions
.
Important!!
Be prepared to stop the shade during programming. Know
your motor and remote control before proceeding.
During the first operation and before setting the limits, we recommend
unrolling the shade (with the motor) down past the lower limit but not so
far that the tube is completely exposed. This is to ensure the material is
properly seated and aligned to the tube. The shade material is affixed to
the tube using double sided tape. Do not unroll the shade to the point
where it is stressing the tape. The programming step for the first limit will
activate the motor to move without stopping!! You will need to stop the
motor using the remote control or the shade and motor can get damaged.
Look for material walk-off. If the material walks off do not finish
programming the shade and skip to troubleshooting.
