19 I
KLIP (POD) & STEIN
I
INSTALLATION
–
REV 00
Square bar assembly
Tube assembly with fabric
WARNING: Insert the tube with the rolled up fabric into the square bar roller supports. First insert
the side of the cap with hole into the plate with pin, then the winch/motor side, having pre -
assembled the nuts if required. Secure the latter to the roller support with the screws provided.
WARNING: Fit the brackets considering the position of arm supports and centre balance supports.
Fit the square bar inserting it on the pre-assembled joint and secure with the rivets provided (detail
D).
