Page. 8
Easy Spring Ultra Skyline
Installation
Manual | v2.0
2021 ©Copyright All Rights Reserved Rollease Acmeda
SECTION B | INSTALLATION
BEFORE ADDING OR REMOVING PRE-TURNS
SPRING OPERATION
Before removing the shade, ensure the shade is lowered slightly in its locked position. Shade must not be resting
on top limit. This is to prevent the spring from loosing the pretension when removing the shade from brackets.
Adding Pre-Turns
Use a Wrench for pre-tensioning
Removing Pre-Turns
To lock the pretension, rotate in the pre-tension
direction slightly and then allow the head to un-
tension slightly and lock
Limit Position
Locked Position
(Right Hand – back roll - control shown as example)
Note:
Rotate 90° passed
desired tension to
lock
the spring
Note:
Rotate 45° passed
desired tension to
unlock
the spring
Gently release spring
head whilst holding the
shade firmly as the spring
tension unwravels itself
(Spring head will spin in
the opposite direction of
pre-tensioning)
