ROLLEASE ACMEDA
Automate
™
Programming Instructions | Venetian Tilt Motors |
7
4 WIRING
Ensure cable is kept clear of fabric.
Ensure antenna is kept straight and away from metal objects.
Automate DC motor MTDCRF-TILT-1 is powered from a 12V DC power source. AA Battery wands,
re-chargeable battery packs and A/C power supplies are available, with a variety of quick connect extension
cords. For centralized installations, power supply range can be extended with 18/2 wire (not available through
Rollease Acmeda).
•
During operation, if voltage drops to less than 10V, the motor will beep 10 times to indicate a power
supply issue.
•
Motor will stop running when the voltage is lower than 7V and it will resume again when the voltage is
greater than 7.5V.
NOTE:
•
Passthrough Tilt Motor MT01-4001-xxx002 comes supplied with a rechargeable battery pack.
Power Supply
Compatible Motors
MTBWAND18-25 | Battery Tube for 18/25mm DCRF (no Battery) Mtrs
(inc Mt clips)
MTDCRF-TILT-1
MTDCPS-18-25 | Power Supply for 18/25-CL/Tilt DCRF (no Bttry) Mtr
MTBPCKR-28 | Rechargeable Wand
MT03-0301-069011 | USB Wall Charger - 5V, 2A (AU ONLY)
MT01-4001-xxx002
MT03-0301-069008 | USB Wall Charger - 5V, 2A (US ONLY)
MT03-0301-069007 | 4M (13ft) USB Micro Cable
MT03-0302-067001 | Solar Panel Gen2
Extension Cables
Compatible with
MTDC-CBLXT6 DC Battery Motor Cable extender 6” / 155mm
MTDCRF-TILT-1
MTDC-CBLXT48 DC Battery Motor Cable extender 48” / 1220mm
MTDC-CBLXT96 DC Battery Motor Cable extender 96” / 2440mm
MT03-0301-069013 | 48”/1200mm 5V Cable Extender
MT01-4001-xxx002
MT03-0301-069014 | 8”/210mm 5V Cable Extender
MT03-0301-069
Power Options
4.1
