manualshive.com logo in svg

rollease acmeda AUTOMATE AX30, Manual

Share
Download
rollease acmeda AUTOMATE AX30 Manual Download Page 6

6 

| Automate

™

 Programming Instructions | AX30/AX50 External Shade Motor  

ROLLEASE ACMEDA

 

 

.

Crown

Bracket

Drive

Adapter

Retaining Clip

Motor Head

Step 1.  

Cut roller tube to required length. 

Please refer to Rollease Acmeda System Assembly Manual for full assembly instructions relevant to the 

hardware system being used, including recommended crown, drive and bracket adapter kits.

Step 2.  

Ensure roller tube is clean and free from burrs.

Step 3.  

Fit required crown, drive and bracket adapters.

Step 4.  

Slide Motor into tube.

 

Insert by aligning key-way in crown and drive  

 

wheel into the tube.

Step 5.  

Mount motorized tube onto brackets.

 

1 

ASSEMBLY

Tube must be close fitting with chosen crown 

and drive adapters. 

Impact detection does not require a 2 piece drive set. The use of a standard 1 part 
drive adapter is compatible. Zipscreen is needed to let the impact transmit to the top 
during downward movement. The top tube must be able to freely rotate 

~ 5 degrees 

after installation. 

IMPORTANT

Summary of Contents for AUTOMATE AX30




























Reviews:

No comments

Brands by name

Popular brands

Load more brands