DG Flugzeugbau GmbH Flight Manual LS 8-18 Handling, Servicing, Maintenance
8.4 Ground Handling / Road Transport
continued
d)
Supporting Area to lift whole Sailplane
1.
Under wing spar near fuselage, never under nose section
2.
Under fuselage shell in front of wing (main bulkhead)
3.
Fuselage shell at tail skid
e)
Supporting Area for Road Transport
Fuselage:
Tail skid or tail wheel
Main wheel
Fuselage shell in front of landing gear, minimum width of support 30 cm
<11.8 in>.
Wing:
Right spar at inner or outer main pin hole
Left forked spar at inner main pin hole. At outer main pin hole only, when both
fork ends are supported
Shell at root, minimum width of support 15 cm <5.9 in>.
Shell at outer air brake end, minimum width of support 25 cm < 10 in>.
Horizontal
At any place, minimum width of support 8 cm <3.2 in>.
Tail Unit:
Note:
Always keep wing discharge orifices open for ventilation during trailer storage.
Edition: July 1999
Revision - 0
Page 8-4