5
Connect the power cord in to the power socket. Press the power switch button to one.
If you purchased a ROLL
-
X compressor connect to the compressor outlet.
Use the air pressure regulator to increase or decrease the pressure of the glide beam roller.
(To activate the regulator pull the black knob outwards and increase(turn right) or decrease
(turn left) when you are done push the black knob back in again.
If you purchased Illumination use the On & Off button Illumination to turn on and off lights.
If you already have a
compressor,
Connect it to the air
filter mounted on the
table.
ROLL
-
X CONTROL PANEL & ROLL
-
X COMPRESSOR OR OWN
