background image

 

1

Thank you for purchasing 10/100/1000M Gigabit Ethernet Adapter. 
This document provides detailed guidelines to install and use the 
adapter for network installers or users. The Giga Ethernet Adapter 
is a 32-bit PCI 10/100/1000Mbps NWay Gigabit LAN adapter. The 
Giga Ethernet Adapter provides extremely fast data transfer rates 
up to 2000Mbps at full duplex mode for high bandwidth usage in 
areas such as network servers, workstations, Storage Area 
Networks (SANs), Network Attach Storage (NAS) and high-speed 
video streaming. 

This manual is divided into two chapters and two appendices. 
The following summarizes the contents of the chapters and 
appendices. 

Chapter 1  Introduction 

Hardware Overview

 

The Giga Ethernet Adapter is a highly integrated and cost-effective 
single-chip Gigabit Ethernet Adapter that provides 32-bit 
performance, PCI bus master capability, and full compliance with 
IEEE 802.3 10Base-T, IEEE802.3u 100Base-TX and IEEE 
802.3ab 1000Base-T specifications. It also supports ACPI, PCI 
power management for modern operating systems that are capable 
of Operating System Directed Power Management (OSPM) to 
achieve the most efficient power management. 

Through the aid of a VLAN membership, The Giga Ethernet 
Adapter adheres to the 802.1Q for multiple VLAN support, and 

Summary of Contents for 21.11.3043










Reviews: