77
Advanced Use
❍
CONTROL MIDI CH.
(Control MIDI Channel)
(1–16) (Initial setting: 1 ch.)
Select the MIDI channel that will used to transmit and
receive MIDI messages to control the VK-88. This channel
can be used to select registrations on the VK-88, and to
control the expression of the organ voice, etc.
❍
UPPER ORGAN MIDI CH.
(Upper Organ MIDI Channel)
(1–16) (Initial setting: 1 ch.)
Sets the MIDI channel on which data will be transmitted
and received for the upper organ voice.
❍
LOWER ORGAN MIDI CH.
(Lower Organ MIDI Channel)
(1–16) (Initial setting: 3 ch.)
Sets the MIDI channel on which data will be transmitted
and received for the lower organ voice.
❍
PEDAL ORAGN MIDI CH.
(Pedal Organ MIDI Channel)
(1–16) (Initial setting: 2 ch.)
Sets the MIDI channel on which data will be transmitted
and received for the pedal organ voice.
❍
UPPER ORCHESTRAL TONES MIDI CH.
(Upper Orchestral Tones MIDI Channel)
(1–16) (Initial setting: 4 ch.)
Specifies the MIDI channel on which data will be
transmitted and received for Upper Orchestral Tones.
❍
LOWER ORCHESTRAL TONES MIDI CH.
(Lower Orchestral Tones MIDI Channel)
(1–16) (Initial setting: 5 ch.)
Specifies the MIDI channel on which data will be
transmitted and received for Lower Orchestral Tones.
❍
PEDAL ORCHESTRAL TONES MIDI CH.
(Pedal Orchestral Tones MIDI Channel)
(1–16) (Initial setting: 6 ch.)
Specifies the MIDI channel on which data will be
transmitted and received for Pedal Orchestral Tones.
❍
DRUM MIDI CH. (Drum MIDI Channel)
(1–16) (Initial setting: 10 ch.)
Specifies the MIDI channel on which drum notes will be
received.
❍
SPRING SHOCK MIDI CH.
(Spring Shock MIDI Channel)
(1–16) (Initial setting: 9 ch.)
Specifies the MIDI channel on which Spring Reverb Shock
data will be received and transmitted.
NOTE
Different MIDI channels must be assigned to the upper/
lower/pedal/drum/Upper Orchestral Tones/Lower
Orchestral Tones/Pedal Orchestral Tones/Spring Shock
parts. It is not possible to select the same channel for two
or more parts. MIDI channels which have already been
assigned will not be available for selection.
NOTE
Set the control MIDI channel to a different channel than
used for Drum/Orchestral Tone/Spring Shock. It is not
possible to select the same MIDI channel. Nor is it
possible to select a MIDI channel that’s already selected.
If you connect an external drum pad or sequencer and
set its MIDI transmit channel to channel 10, you will be
able to play drum sounds on the VK-88. In this case, the
sounds of the GM2 standard drum set will be played (p.
100).
VK-88_e.book 77 ページ ２００４年４月２０日 火曜日 午前９時０分
