35
Playing the Organ
Tone Wheel type
Selects the type of tone wheel.
1
Press the [TONE WHEEL] button to select the type of tone wheel.
Each time you press the [TONE WHEEL] button, the tone wheel will switch between
the following settings.
Leakage Noise
Separately from the leakage noise selected by the Tone Wheel Type, you can add
leakage noise independently.
2
Turn the [LEAKAGE] knob.
Turning the knob toward the left will decrease the volume of the leakage noise, and
turning it toward the right will increase the volume of the leakage noise.
Key Click
This adjusts the level of the key click sound.
3
Turn the [KEY CLICK] knob.
Turning the knob toward the left will decrease the volume of the key click, and
turning it toward the right will increase the volume of the key click.
Type
Explanation
VINTAGE 1
A tone wheel that simulates the tone wheel organs of the
70’s.
VINTAGE 2
A tone wheel that simulates the tone wheel organs of the
60’s.
SOLID
Harmonics are added to the VINTAGE 1 tone wheel’s
lower range.
This tone wheel boosts the low range.
CLEAN
A tone wheel with no leakage noise.
NOTE
If the “VINTAGE1,”
“VINTAGE2” or “SOLID”
wheel type is selected, there
will still be some leakage noise
even if the [LEAKAGE] knob is
turned all the way to the left.
VK-88_e.book 35 ページ 2004年4月20日 火曜日 午前9時0分