Roland VIMA JM-8 Owner'S Manual Download

Page: 23 / 176

Playing back songs on the internal hard disk

VIMA JM-8

Playing back songs on the internal
hard disk

To play back a song stored on the JM-8’s internal hard
disk, proceed as follows:

Note:

The JM-8 is supplied with 5 internal songs.

(1) Connect the JM-8 to an audio system (or connect a

pair of headphones) and switch it on (see p. 18).

(2) If the

[INTERNAL]

display button is not selected,

press it.

If the display does not look similar to the above illus-
tration, press the [EXIT] button several times until you
see the

[INTERNAL]

[CD]

and

[EXTERNAL]

display but-

tons.

Note:

The

[CD]

display button is only active (clearly visible)

when the internal drive contains a CD or CD-ROM. Like-
wise, the

[EXTERNAL]

display button is only active when a

storage device is connected to the EXTERNAL MEMORY
port.

The list to the right displays the contents of the hard
disk.

Note:

See “If you can’t see the song (or folder) you need”

on p. 24 if you cannot see the file you want to play back.

(3) Select the file you want to play back by pressing its

line.

The selected song name is highlighted and also
appears in the display’s upper left corner.

Note:

See “Using the Finder to locate songs and pictures”

on p. 47 for how to search the selected storage device for
specific files.

Note:

The “My Songs” folder is empty when the JM-8 is

shipped. We recommend using it to store your own song
files.

(4) Press the [

®÷

] button to start playback.

The main page shows the current playback position.

This will be a measure number for a Standard MIDI
File (SMF) or a time indication for audio files.

(5) Set the [BACKING] knob to the desired level.

Use the [MASTER VOL] knob to set the JM-8’s overall
level. If only the accompaniment is too loud or too
soft, change the setting of the [BACKING] knob.

(6) Press [

®÷

] again to temporarily pause playback.

Press it again to resume playback.

(7) Press the [

] button to stop playback.

Name of the song you select

BACKING

JM-8_OM_GB.book Page 23 Wednesday, July 29, 2009 4:43 PM

Summary of Contents for VIMA JM-8

















































































































































































Search results

Summary of Contents for VIMA JM-8

Reviews:

Related manuals for VIMA JM-8

Brands by name

Popular brands

Roland VIMA JM-8, Owner'S Manual

Search results

Summary of Contents for VIMA JM-8

Reviews:

Related manuals for VIMA JM-8

Brands by name

Popular brands