Roland VersaSTUDIO BN-20A, User Manual

Page: 21 / 120

This section describes operations when printing only.
Refer to
"Cutting / Printing and Cutting(P. 38)"
,
"Performing Printing and Cutting Separately(P. 46)"
.
Step 1: Loading Media
Loading roll media
Procedure
1.
Move the left media guide to the left edge.
(1)
Push the loading lever ( ) backward.
(2)
Move the left media guide ( ) to the left.
2.
Attach the media flange ( ) to one end of the media bar ( ) .
Insert the side of the media bar with a hole ( ) into the media flange.When loading roll media
with a 3-inch paper tube inner diameter, attach the media flange with ( ) on the inside. When
loading roll media with a 2-inch paper tube inner diameter, attach the media flange with ( )
on the inside.
3.
Secure the media flange and media bar with the mounting pin ( ).
Printing
20
Basic Operations