Roland V-Drums TD-20X Owner'S Manual Download

Page: 89 / 156

Chapter 6. Recording and Editing Patterns—Sequencer

You can use an optional CompactFlash card to save pattern

data.

User patterns can be saved or loaded individually. This

provides a convenient way to handle just the patterns you

need.

fig.CardImage

When creating a backup on a CompactFlash card (p. 92),

user patterns are handled in sets of 100 patterns.

“PATTERN CARD” screen

fig.06-20-ptn-cd.eps_70

You can check the amount of CompactFlash card

available by pressing the [TOOLS] button (p. 125).

Patterns will be saved up to 100.

Insert a CompactFlash card into the CompactFlash

card slot on the TD-20X’s front panel.

Press the [PATTERN] button.

Press the [F4 (EDIT)] button.

The “PATTERN EDIT” screen appears.

Press the [F5 (CARD)] button.

The CompactFlash indicator light, and the “PATTERN CARD”

screen appears.

If you insert a card being used for the first time by the

TD-20X, display shows “Unformatted!” Refer to

“Formatting a CompactFlash Card [F1 (FORMAT)]” (p. 94)

and initialize it.

Press the [F1 (SAVE)] button.

The “PATTERN SAVE” screen appears.

fig.06-21-ptn-cd-save.eps_70

Press the [CURSOR (up)] button, and then use the

[-] [+] buttons or the [VALUE] dial to select the

pattern you want to save.

Press the [CURSOR (down)] button, and then use

the [-] [+] buttons or the [VALUE] dial to select a

backup pattern to which you want to save the

pattern.

You can select an empty backup pattern with the lowest

number by pressing the [F4 (NEW)] button.

Press the [F5 (SAVE)] button.

The confirmation screen appears.

fig.06-22-ptn-cd-save-conf.eps_70

To cancel, press the [F1 (CANCEL)] button.

Press the [F5 (EXECUTE)] button to save the

pattern.

Saving a Pattern [F5 (CARD)]

CompactFlash

Backup 99

Backup 01

Pattern

(100)

Pattern 100

Pattern 001

• Never remove a CompactFlash card while the

CompactFlash indicator on the TD-20X’s top panel

is lit. Doing so may corrupt the unit’s data or the

data on the CompactFlash card.

• Carefully insert the CompactFlash card all the way

in—until it is firmly in place.

• The TD-20X can use CompactFlash cards rated for

3.3V in a capacity range of 16 MB–4 GB (type 1).

Other cards cannot be used.

Saving a Pattern to a CompactFlash
Card [F1 (SAVE)]

TD-20X_e.book 89 ページ２００９年６月８日　月曜日　午後３時５０分

Summary of Contents for V-Drums TD-20X





























































































































































Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Related manuals for V-Drums TD-20X

Brands by name

Popular brands

Roland V-Drums TD-20X, Owner'S Manual

Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Related manuals for V-Drums TD-20X

Brands by name

Popular brands