Roland V-Drums TD-20X Owner'S Manual Download

Page: 92 / 156

Chapter 7. Using CompactFlash Cards [CARD]

All user memory data (p. 31) will be saved up to 99 sets.

Insert a CompactFlash card into the CompactFlash

card slot on the TD-20X’s front panel.

Press the [CARD] button.

The [CARD] button and the CompactFlash indicator light, and

the “CARD A” screen appears.

If you insert a card being used for the first time by the

TD-20X, display shows “Unformatted!” Refer to

“Formatting a CompactFlash Card [F1 (FORMAT)]” (p. 94)

and initialize it.

Press the [F1 (SAVE)] button.

The “CARD SAVE” screen appears.

fig.07-003-card-save.eps_70

Use the [-] [+] buttons or the [VALUE] dial to select a

backup number to which you want to save the data.

You can select an empty backup area with the lowest

number by pressing the [F4 (NEW)] button.

Press the [F5 (SAVE)] button.

The confirmation screen appears.

fig.07-004-card-save-conf.eps_70

To cancel, press the [F1 (CANCEL)] button.

If you want to change the name of the backup area,

press the [F4 (NAME)] button.

Press the [F5 (EXECUTE)] button to save the data.

Each backup area can be given a name of up to 12 characters.

In the “CARD SAVE” confirmation screen, press the

[F4 (NAME)] button.

The “CARD SAVE NAME” screen appears.

fig.07-005-card-name.eps_70

Use the [CURSOR (left/right)] buttons to move the

cursor to the character to be changed.

Use the [VALUE] dial, the [-] [+], or [CURSOR (up/

down)] buttons to change the character.

When you’re finished, press the [F5 (SAVE)] button

to return to the confirmation screen.

Saving Data to a CompactFlash
Card [F1 (SAVE)]

Naming a Backup [F4 (NAME)]

Function button

[F1 (INSERT)]

A blank space is inserted at the cursor
position, and characters after this point are
moved to the right one space.

[F2 (DELETE)]

Character at the cursor position is deleted,
and characters after this point are moved
to the left one space.

[F3 (SPACE)]

Character at the cursor position is replaced
by a blank space.

[F4 (CHAR)]

Type of character at the cursor position
changes between upper case/lowercase
alphabet, or numbers and symbols.

[F5 (SAVE)]

Pressed to save the data.

TD-20X_e.book 92 ページ２００９年６月８日　月曜日　午後３時５０分

Summary of Contents for V-Drums TD-20X





























































































































































Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Related manuals for V-Drums TD-20X

Brands by name

Popular brands

Roland V-Drums TD-20X, Owner'S Manual

Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Related manuals for V-Drums TD-20X

Brands by name

Popular brands