Roland V-Drums TD-20X Owner'S Manual Download Page 85

Page: 85 / 156

Chapter 6. Recording and Editing Patterns—Sequencer

(6) Recording

Press the [PLAY] button to begin recording.

The [PLAY] button stops flashing and remains lit, and the

“PATTERN RECORDING” screen appears.

fig.06-005-rec.eps_70

Play with pads or MIDI keyboards to record.

Press the [STOP] button to stop recording.

The [PLAY] and [REC] button go off.

You can name the recorded pattern (p. 79).

The Rehearsal function temporarily suspends recording

during the recording process, allowing you to rehearse and

then quickly resume recording.

Start recording (p. 83).

The recording icon (

) appears.

While recording is underway, press the [REC]

button.

The [REC] button flashes, and the rehearsal icon (

)

appears.

Now, data from pads or keyboard cannot be recorded.

fig.06-006-reh.eps_70

Press the [REC] button to resume recording.

The [REC] button lights.

When you want to edit a pattern, for example by copying a

pattern or joining two patterns, access the “PATTERN EDIT”

screen as follows.

Press the [PATTERN] button.

The “PATTERN” screen will appear.

Press the [F4 (EDIT)] button.

The “PATTERN EDIT” screen will appear.

“PATTERN EDIT” screen (Preset Pattern)

fig.06-007-ptn-edit-preset.eps_70

“PATTERN EDIT” screen (User Pattern)

fig.06-008-ptn-edit-user.eps_70

Pressing the [EXIT] button return to the “PATTERN”

screen.

Checking the Tones and Phrases
During Recording (Rehearsal)

Editing a Pattern [F4 (EDIT)]

Function button

[F1 (COPY)]

Copies the pattern to a user pattern. You can
also copy specified parts or measures (p. 86).

[F2 (APPEND)]

Joins two patterns into one pattern (p. 87).

[F3 (ERASE)]

Erases the performance data from a pattern.
You can also erase the performance data from
specified measures (p. 87).

[F4 (DELETE)]

Deletes a pattern. You can also delete specified
measures from a pattern (p. 88).

[F5 (CARD)]

Saves the pattern to a CompactFlash card
(p. 89).

TD-20X_e.book 85 ページ２００９年６月８日　月曜日　午後３時５０分

Summary of Contents for V-Drums TD-20X





























































































































































Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Brands by name

Popular brands

Roland V-Drums TD-20X, Owner'S Manual

Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Brands by name

Popular brands