Roland V-Drums TD-20X Owner'S Manual Download

Page: 122 / 156

122

Chapter 11. Other Functions [TOOLS]

Use the function buttons, [CURSOR], [-] [+] buttons,

and [VALUE] dial to select the desired drum kit.

By holding down the [SHIFT] button and pressing the

[KIT] button, you can access a screen where the

CompactFlash card is selected as the drum kit selection

location.

Play the drum kit.

Now you can play the drum kit that shows in the screen.

This function is cancelled if you exit the “KIT SELECTION”

screen.

Select a drum kit as described in steps 1–3 of

“Playing a Kit from the CompactFlash without

Loading It (Kit Selection) [F1 (KIT SEL)]” (p. 121).

fig.11-004-prekit-copy.eps_70

Press the [F5 (COPY)] button.

Use the [-] [+] buttons or [VALUE] dial to select the

copy-destination drum kit.

Press the [F5 (COPY)] button.

A confirmation message will appear.

fig.11-005-prekit-copy-conf.eps_70

If you decide to cancel the copy or exchange, press the [F1

(CANCEL)] button.

Press the [F5 (EXECUTE)] button to execute.

When copying has been completed, Kit Selection will be

cancelled, and the “DRUM KIT” screen will appear with the

copied drum kit selected.

You can view the volume that is being output from the

MASTER OUT, PHONES, or DIRECT OUT jacks.

In the “TOOLS A” screen (p. 121), press the [F2 (OUT

MON)] button.

The “OUTPUT MONITOR” screen appears.

fig.11-006-mon.eps_70

Use the [-] [+] buttons or the [VALUE] dial to select

the output.

Press the [EXIT] button to return to the “TOOLS A”

screen.

You can also access the “OUTPUT MONITOR” screen by

pressing the [KIT] button and then pressing the [F2

(FUNC)] button (p. 41).

Function button

[F1 (LIST)]

Displays a list of drum kits.

[F5 (COPY)]

Copies the selected drum kit to a drum kit in
user memory.

If you selected [F3 (CARD)] in step 2

[F2 (BANK -)]

Selects the next-numbered backup.

[F3 (BANK +)]

Selects the previous-numbered backup.

Copying the Drum Kit Chosen in Kit
Selection

Viewing the Output Level
(OUPUT MONITOR)
[F2 (OUT MON)]

TD-20X_e.book 122 ページ２００９年６月８日　月曜日　午後３時５０分

Summary of Contents for V-Drums TD-20X





























































































































































Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Related manuals for V-Drums TD-20X

Brands by name

Popular brands

Roland V-Drums TD-20X, Owner'S Manual

Search results

Summary of Contents for V-Drums TD-20X

Reviews:

Related manuals for V-Drums TD-20X

Brands by name

Popular brands