Assembly
7
ENG
JPN
DEU
FRA
ITA
ESL
POR
NLD
1
2
3
4
5
12
2
3
Sound module
Note
Be careful not to
drop the sound
module.
1
The label on the bottom of each pedal distinguishes
the kick pedal (KIK) from the hi-hat pedal (HHC).
Bottom of the pedal
Kick pedal
Hi-hat pedal
Connect if you use the
separately sold OP-TD1C to
add a cymbal.
If you’re not adding a
cymbal, “CR2” is not used.
Use the included cable
clips to secure the
cables.
Connecting the Cables
Connect the cable to the sound module and each pads as shown in the illustration.
Each cable has a label indicating the pad to which it should be connected.
SNR
SNR
T1
T1
T2
T2
T3
T3
HH
HH
CR1
CR1
RD
RD
HHC
HHC
KIK
KIK
CR2
Bottom of
the pedal
Underside of the
cymbal
Backside of the
sound module
Underside of
the pad
Pull out
13
* Before you play, verify that the bolts and knobs are not loose.
OP-TD1C
