background image

6

Setting Up the KD-9

Connecting to a Percussion 

Sound Module

To prevent malfunction and/or damage to speakers or 

other devices, always turn down the volume, and turn off 

the power on all devices before making any connections.

Use the connection cable to connect the KD-9 to your 

percussion sound module (e.g., TD-20X).
Connect the L-shaped plug of the cable to the KD-9’s 

output jack.

Make sure KD-9 does not touch the drum stand or other 

pads.

OUTPUT jack

KIK cable (TD-9, TD-4)
To KICK jack (TD-20X, TD-20, TD-12)

Recommended Percussion Sound 

Module Parameter Settings

Below you will find recommended trigger parameters 

when using the KD-9 with various sound modules.
The trigger parameters should be adjusted as necessary 

to match the actual state of your configuration, and the 

environment in which it is being used.

For details, refer to the owner’s manual for your percus-

sion sound module.

TD-20X, TD-20, TDW-20, TD-12

Trig Type

KD8

Sensitivity

8

Threshold

4

Scan Time

2.0

TD-9

Trig Type

KD9

If “KD9” is not shown as a Trig Type value, make settings as 

follows.

Trig Type

KD8

Sensitivity

8

Threshold

4

TD-4

Pad Type

KD-9

If “KD-9” is not shown as a Pad Type value, make settings 

as follows.

Pad Type

KD-8

Summary of Contents for V-Drums KD-9









Reviews: