61
If an incorrect operation is performed, or if processing could not be performed as you specified, an error message appears.
Refer to the explanation for the error message that appears, and take the appropriate action.
Message
Meaning
Action
Battery Low!
The battery has run down.
Recharge the batteries, or use an AC adaptor.
Can’t Read
Failed to load data from USB flash drive.
Make sure that the USB flash drive is inserted correctly (p. 6).
Also make sure that you’re using a USB Flash Memory sold by Roland.
It may be that the file is damaged.
Do not use this file.
This file cannot be loaded since its format is incorrect.
This is a file that this unit is unable to play.
Charge Battery
The battery has run low.
Recharge the batteries, or use an AC adaptor.
Communication Error
The MIDI IN connection was broken.
Check that there is no problem with the MIDI cable connected to this
unit’s MIDI IN, and that the MIDI cable was not disconnected.
Copy Protected. Can’t
Save
The song data is copy-protected, and therefore cannot be saved.
This song data can only be played.
Damaged Media
It may be that the USB flash drive is damaged.
Format the USB flash drive again (p. 43).
Alternatively, use a different USB flash drive.
Media Full
Data cannot be written because the USB flash drive has no more free
space.
Delete unneeded files from the USB flash drive.
Alternatively, use a different USB flash drive device, one that has more
free space available.
Memory Error
It is possible that the contents of system memory have been damaged.
Please execute a Factory Reset (p. 44).
If this does not resolve the problem, contact your dealer or a nearby
Roland service center.
MIDI Buffer Full!
An unusually large amount of MIDI data was received, and could not
be processed.
Reduce the amount of MIDI messages that are being transmitted.
No storage media is
inserted.
USB flash drive is not connected, or is inserted incompletely.
Turn the power off, insert the USB flash drive firmly, and then turn the
Unsupported Media!
A USB flash drive that is not supported by this unit is connected.
Use USB Flash Memory sold by Roland. We cannot guarantee
operation if other products are used.
Write Error!
Failed to write data to USB flash drive.
Make sure that the USB flash drive is inserted correctly (p. 6).
Also make sure that you’re using a USB Flash Memory sold by Roland.
Write-Protected.
The file itself is write protected.
Make sure that the file is not write protected.
Error Messages
In
tr
oduc
tion
Per
forming
Rec
or
ding
Looper
Settings
Appendix
Summary of Contents for V-Combo VR-09
Page 1: ...VR 09 VR 730 Copyright 2017 ROLAND CORPORATION Reference Manual...
Page 2: ......
Page 65: ...01...
