56
Tone Parameters
Balance (Chorus Balance)
This sets the volume balance of the chorus of the chorus sound
and normal sound.
Value:
0–100
fig.09-20a(LCD_LTonePartial1)
<FORM>
:
<PITCH>
:
<TVF>
:
<TVA>
:
<MOD>
:
Partial Parameters
Value
Balance
100
Only the chorus sound is heard.
50
Chorus sound = Normal sound
0
Only the normal sound is heard.
Restriction of the available parameters caused by Structure
Depending on what
Structure
(p. 50) is used, the available parameters may be different.
1.
Some parameters included in a Partial that uses a
PCM sound generator
are invalid. The
mark is shown when the parameters apply even for PCM sounds.
2.
With
Ring Modulation
, some parameters in Partial 2 will automatically become the same as
for Partial 1. Therefore, the values shown in the display are irrelevant with the actual values.
The
mark is shown for such parameters.
vc1_for_XT_e2 56 ページ ２００５年３月２３日 水曜日 午後４時１３分
