45
LAN/RS-232 Command Reference
List of Commands
* When sending a sequence of commands to the V-600UHD from a controller, after each one, be sure to verify that an “ACK” response is returned
before sending the next command.
Video-related operations
Item
Sent command
Response command
Parameter
Select PGM channel
stxPGM:a;
ACK
a: 0 (CH 1) –7 (CH 8)
Select PST channel
stxPST:a;
ACK
a: 0 (CH 1) –7 (CH 8)
Select channel to send to AUX bus
stxAUX:a;
ACK
a: 0 (CH 1) –7 (CH 8)
Select transition pattern
stxTRS:a;
ACK
a: 0 (WIPE 1), 1 (WIPE 2), 2 (WIPE 3), 3 (MIX)
Set video transition time
stxTIM:a;
ACK
a: 0 (0.0 sec) –40 (4.0 sec)
Press the [AUTO] button
stxATO;
ACK
Press the [CUT] button
stxCUT;
ACK
Select COMPOSITION type
stxCTY:a;
ACK
a: 0 (None), 1 (PinP1-1), 2 (PinP1-2), 3 (Key1), 4 (PinP1-1+Key1),
5 (PinP1-2+Key1)
Select DSK type
stxDTY:a;
ACK
a: 0 (None), 1 (PinP2-1), 2 (PinP2-2), 3 (Key2), 4 (PinP2-1+Key2),
5 (PinP2-2+Key2)
Press the [COMPOSITION] button
stxCMP;
ACK
Press the [DSK] button
stxDSK;
ACK
Set output fade on/off
stxFDE:a;
ACK
a: 0 (OFF), 1 (ON)
Set output fade time
stxFDT:a;
ACK
a: 0 (0.0 sec)–100 (10.0 sec)
Audio-related operations
Item
Sent command
Response command
Parameter
Adjust volume level of input audio
stxIAL:a,b;
ACK
a: 0 (CH1)–7 (TEST TONE)
b: -801 (-INF dB), -800 (-80.0 dB)– 0 (0.0 dB)–100 (10.0 dB)
Adjust volume level for master out
stxOAL:a;
ACK
a: -801 (-INF dB), -800 (-80.0 dB)– 0 (0.0 dB)–100 (10.0 dB)
Adjust volume level for AUX-bus audio
stxOAX:a;
ACK
a: -801 (-INF dB), -800 (-80.0 dB)– 0 (0.0 dB)–100 (10.0 dB)
System-related operations
Item
Sent command
Response command
Parameter
Call up memory
stxMEM:a;
ACK
a: 0 (1-1)–63 (8-8)
Acquire status of V-600UHD
stxACS;
ACK
Version information
stxVER;
stxVER:V-600UHD,a;
a: Version
* The version info is ASCII text strings.
Flow control
XON
Flow control
XOFF
Commands spontaneously sent from the V-600UHD
Item
Sent command
Response command
Parameter
Error detected
stxERR:a;
a: 0 (syntax error) The received command contains an error.
5 (out of range error) An argument of the received command is out of range.
Flow control
XON
Flow control
XOFF
