manualshive.com logo in svg

Roland V-40HD, Owner'S Manual, Page: 10 / 60

Share
Download
Roland V-40HD Owner'S Manual Download Page 10

10

Connecting the Monitor

To operate the V-40HD, a preview monitor must be connected. Connect a monitor that supports HDMI input to the PVW OUT 
connector.

fig.connect-monitor.eps

HDMI

The resolution and refresh rate of monitor output are fixed at 1920 x 1080/60 Hz (progressive). Connect a monitor that supports this resolution and 
refresh rate. Also, the monitor must support HDCP (High-bandwidth Digital Content Protection) signals.

About the View on the Preview Monitor

Use the PVW (Preview) selector on the top panel to choose the view displayed on the preview monitor.

fig.preview-select.eps

You can select one from the following four views to display.

INPUT  This displays the input source picture using a four-way split screen. (The display frame rate of the preview drops when this setting is used.)
PST 

The picture of standby channel is displayed.

PGM 

The picture on the current output channel is displayed.

DSK 

This previews the status of DSK composition. Adjust the amount of keying in this mode.

fig.INPUT-view.eps

Presented by

CH.1 HDMI

CH.2 HDMI

CH.3 HDMI

CH.4 HDMI

*  When [INPUT] has been selected, a red border is displayed around the channel of current program output. A green border is displayed around 

the channel that is on standby.

*  The input source pictures are displayed in the preview monitor directly (without any parameter changes). Settings such as color adjustment or 

scaling are not applied.

When [INPUT] has been selected, the frame rate drops by about 5 fps. The frame rate does not fall when a setting other than [INPUT] is selected. 
When the source signal is interlace, the displayed image moves up and down for 1 line width.

You can change the text labels for [CH 1] through [CH 4]. Refer to “Changing the Preview Labels” (p. 43).

About the Preview Monitor

Summary of Contents for V-40HD





























































Reviews:

No comments