manualshive.com logo in svg

Roland V-40HD, Owner'S Manual, Page: 43 / 60

Share
Download
Roland V-40HD Owner'S Manual Download Page 43

43

About Other Features

Changing the Preview Labels

You can change the text for channel names displayed on the preview monitor. Up to 8 characters of text can be displayed.

1.  Display the System menu.

Press the [MENU] button to display the menu. Use the [CURSOR] buttons to select [System], then press the [ENTER] button to 
display the System menu.

2.  Select the label whose text you want to change.

Use the [CURSOR] buttons to select [PVW Label], then press the [ENTER] button to display the list. Use the [CURSOR] buttons to select 
the label whose text you want to change. Pressing the [ENTER] button switches the display to the screen for changing the text.

fig.label-menu.eps

You can also hide the labels by going to the [PVW Label] list and setting [Indicate] to [OFF].

3.  Change the text string.

Use the [CURSOR] buttons to move the cursor left or right, and turn the [VALUE] dial to change the text.

fig.label-edit.eps

4.  Exit the menu.

Press the [EXIT] button several times to quit the menu.

The display on the preview monitor is not updated while editing is in progress. The display is updated when you quit the menu.

Summary of Contents for V-40HD





























































Reviews:

No comments