3
USING THE UNIT SAFELY
Used for instructions intended to alert
the user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic
animals or pets.
Used for instructions intended to alert
the user to the risk of death or severe
injury should the unit be used
improperly.
The symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In
the case of the symbol at left, it means that the
power-cord plug must be unplugged from the outlet.
The symbol alerts the user to important
instructions or warnings.The specific meaning of the
symbol is determined by the design contained within
the triangle. In the case of the symbol at left, it is used
for general cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never
be carried out (are forbidden). The specific thing that
must not be done is indicated by the design contained
within the circle. In the case of the symbol at left, it
means that the unit must never be disassembled.
About WARNING and CAUTION Notices
About the Symbols
ALWAYS OBSERVE THE FOLLOWING
WARNING
To completely turn off power to the unit, pull out the plug
from the outlet
Even with the power switch turned off, this
unit is not completely separated from its main
source of power. When the power needs to
be completely turned off, turn off the power
switch on the unit, then pull out the plug from the
outlet. For this reason, the outlet into which you choose
to connect the power cord’s plug should be one that is
within easy reach and readily accessible.
Concerning the Auto Off function
On this unit, the power is automatically turned
off after a predetermined amount of time has
passed since an operation was performed
(Auto Off function). If you do not want the
power to be turned off automatically, disengage the
Auto Off function (p. 11).
Do not disassemble or modify by yourself
Do not carry out anything unless you are
instructed to do so in the owner’s manual.
Otherwise, you risk causing malfunction.
Do not repair or replace parts by yourself
Refer all servicing to your retailer, the nearest
Roland Service Center, or an authorized Roland
distributor, as listed on the “Information.”
Do not place in an unstable location
Otherwise, you risk injury as the result of the
unit toppling over or dropping down.
WARNING
Do not use or store in the following types of locations
•
Subject to temperature extremes (e.g.,
direct sunlight in an enclosed vehicle, near
a heating duct, on top of heat-generating
equipment); or are
•
Damp (e.g., baths, washrooms, on wet
floors); or are
•
Exposed to steam or smoke; or are
•
Subject to salt exposure; or are
•
Exposed to rain; or are
•
Dusty or sandy; or are
•
Subject to high levels of vibration and shakiness; or are
•
Placed in a poorly ventilated location.
Use only the supplied AC adaptor and the correct voltage
Be sure to use only the AC adaptor supplied
with the unit. Also, make sure the line voltage
at the installation matches the input voltage
specified on the AC adaptor’s body. Other AC
adaptors may use a different polarity, or be designed for
a different voltage, so their use could result in damage,
malfunction, or electric shock.
Use only the supplied power cord
Use only the attached power cord. Also, the
supplied power cord must not be used with
any other device.
Do not bend the power cord or place heavy
objects on it
Otherwise, fire or electric shock may result.
Avoid extended use at high volume
Use of the unit at high volume for extended
periods of time may cause hearing loss. If you
ever experience any hearing loss or ringing in
the ears, you should immediately stop using
the unit and consult a specialized physician.
Summary of Contents for V-1SDI
Page 39: ...39 For EU Countries For China ...
